User`s manual

-
Press the ESC key, then
press the ENTER key, to
exit and save the long setup
screen.
Press the “‘R” key to
highlight the Rescale
option.
Press the ENTER key to
select the Rescaie option.
Enter the w value that
you can expectfiom the
Chart A results.
Press the ENTER key to
save the Low Value and
move the cursor to the High
Value field.
Enter the &g&k value that
you can expectfrom the
Chart A results.
Press the ENTER key to
save the High Value.
If appropriate, repeat the
previous steps to alter the
Chart B law and high
values.
Press the ESC key, then the
ENTER key
When you press ENTER, the long setup menu reappears on
the display, with the Add option highlighted.
The Rescale option is used to rescale the low and high
values in the Chart Scales screen.
When you press ENTER, the cursor highlights the Chart A
Low Value field in the Chart Scales screen.
This exits and “saves” the Chart Scales screen, then
redisplays the Long SPC Setup Menu.
This completes the multiple SLS calibration and resealing
procedure.
8-51