User`s manual

-
SLS Scale Values
Use these fields, along with the “FC3 calibrate” function, to
enter calibrated scale values for any SLS connected to
COMl, COM2, COM3, and/or COM4. The calibration and
scaling functions and procedures are described in the
Calibration, Chart Scaling, and SLS Scaling on page 8-46.
Log Results?
Use these fields to enable (if OJn or disable (if On) the
logging function for each SL.S used in your application.
(Logging operations are described in Logging Functions on
page 8-52.)
Note: The On/Off status of the “Log Results?” fields has
no effect on the operation of formulas that use the SLS
results.
The last group of data entry and option fields appear in
Figure 8.17.
Figure 8.17 Long SF+C setup Screen [Part 4 of 4)
General Setup
Use e&hated sigma for Cp and Cpk?
Control chart panning percentage
Result description for Chart A
Result description for Chart B
Cpk calculation method for Chart A
Cpk calculation nethod for Chart B
Save stats after running SPC?
Use saued stats uhen running SPC?
No No
lee.88
lee&l
Object width
Object center
Nin of WL-Nean) or Mean-LSLI
Nin of IUSL-Clean) or Mean-LSL)
Use Estimated Sigma?
Use these fields to indicate whether or not you want
estimated sigma to be used to calculate the process
capability indices Cp and Cpk, when you have selected
either an X Bar and R or an X Bar and s chart.