User`s manual

specification limit divided by the number of items in the
sample.
(For more information about chart attributes, refer to Chuti
Attributes Method:
Chart A and Churt B on page g-36.)
Use these fields to enter values that you deem to represent
the ideal outcome for all inspection results in each chart
While the CSS does not use these values in any of the SPC
calculations, it does include them in the statistics report.
You may also want to enter the “target” value in the
“Center line” field in this setup screen.
Display Chart?
Use these fields to disable the display of either chart (at
least one chart must be enabled). Figure 8.13 on page 8-32
shows a typical single-chart display using the X Bar and R
and Histogram chart option.
When just one chart is enabled, it occupies the entire
display. Thus, since the available space is greater, the
associated table can contain all of the statistical data,
including the control limits. (Note that the TAB icon is
missing, since it is not needed in a single-chart display.)
Chart Selection: Chart A and Chart B
Refer to Chart Selection:
Chart A and Chart 3 on page
8-22 for information about chart selection.
g-31