User`s manual

c. Change to a different DOS file, either a new file or
an existing file.
d. Copy the highlighted setup record within the
current file.
^
Long Setup Screen: Fields
When you select the Add option, the cursor moves to the
Description field in the Long SPC Setup Menu, as shown in
Figure 8.10.
Figure 8.10 Description Field: Long SPCSetup Menu
rt Limar .smsm lLmgsFcsetuplkw uonlml2.d
Rtcr tk setup descrlptlol. hwa BC to cmcd. H for klp.
When you enter a descriptive name for the setup record and
press the ENTER key, the cursor moves to the first field of
the Chart Scales screen, as shown in Figure 8.11.
Fgure 8.11 Chart Scales Fields: Long SPC setup Menu
SPC tip nm
Entm tk ruling idomatim. pnrr Bsc wkn he. Pi klp. F3 calibrate.
Note also that the F3 prompt has appeared in the prompt
line in the upper display. This function key selects the
calibration function, which can convert SLS inspection
results to “real world” units, such as inches or centimeters.
Since the calibration and scaling functions and procedures
arc described in the Calibration, Chart Scaling, and SLS
Scaling on page 8-46, they are not included here. Thus, for
the purposes of the following setup screen descriptions, the
chart scales are assumed to be set to their default values.
-
-
8-28