User`s manual

l dBASE User’s Manual
l Lotus l-2-3 User’s Manual
Overview:
Installation
The DataMyte Handbook and MetriStat User’s Manual are
useful if you intend to use statistical process control in your
application and/or want to convert data to the format
required by either of those SPC programs.
The dBASE and Lotus manuals are useful if you intend to
convert data to the format required by either of those
Programs.
Hereisas
ummary of the procedure for installing the CSS
on your PC. (The complete installation procedure is located
in Chapter 2, Installation.)
The CSS is supplied on two 5.2~inch diskettes and on a
single 3.5~inch diskette, and it includes an “install”
program to simplify installation in your PC.
-
If your PC has a 5.2~inch floppy drive, you simply insert
the first diskette in a drive, type “A:lNSTALL” or
“B:INSTALL,” and press the ENTER key. The “install”
program creates an “SLY directory on the destination disk
and loads several files into it. (Note that the destination disk
can be either a hard disk or ajloppy diskette of sufficient
capacity.) At the appropriate point, the CSS asks for the
second diskette, then loads the remaining files onto the
destination disk.
If your PC has a 3.~inch floppy drive, you insert the single
diskette in the drive, type “A:INSTALL” or “B:INSTALL,”
and press the ENTER key. The installation program creates
an “SLS” directory on the destination disk and loads all
files onto it.
After installing the CSS, you can initialize it by simply
typing “SLS” and pressing the ENTER key.
Compatibility
Considerations
CSS “Version 2.0” is compatible with both the Series A and
the Series B SLS; however, you cannot implement the
Series B functions in Version 2.0 unless you are using a
Series B SLS.
CSS “Version 1.0” is not compatible with the Series B SLS;
you cannot implement the new functions in the Series B
SLS unless you are using Version 2.0.
1-2