User`s manual

3.
4.
5.
6.
7.
8.
9.
Add - Select this option to create a new SPC setup
record in the Long SPC Setup Screen. The new setup
record is added to the end of the list of setup records in
the setup menu.
Insert - Select this option to create a new SPC setup
record in the Long SPC Setup Screen. The new setup
record is inserted above the highlighted setup record in
the setup menu.
Delete - Select this option to delete the highlighted
setup record in the setup menu.
Modify - Select this option to modify the highlighted
setup record in the setup menu. When you select the
Modify option, the highlighted setup record appears in
the Long SPC Setup Screen.
Rescale - Select this option to calibrate your
inspection results to “real world” measurements, such
as inches or centimeters. (For detailed information
about the Rescale option, refer to Calibration, Chart
Scaling, and SLS Scaling on page 84.)
In addition, you can change the precision of the results
by selecting 0 to 7 places to the right of the decimal
(the default precision is 2 places to the right of the
decimal).
Charts - Select this option to perform an automatic
SPC operation. For details, refer to the Automatic SPC
Setup Method on page 8-9. Th.e procedure is basically
the same.
Clear - Select this option to clear statistics from a
highlighted setup record that has “Yes” in the “Saved
Stats” column.
10. Report - Select this option if you want to generate a
report based on saved statistics, histograms, or the
setup record. (These reports are described in Repoti
Functions section on page 8-60.)
11. Utilities - Select this option to perform these four
utility functions:
a.
“Export” an SPC setup record to a different DOS
file, either a new file or an existing file.
b. “Import” an setup record from a DOS file in which
you have previously stored setup records.
8-27