User`s manual

hart Linear Sensor
Figure w Long WC setup Menu
Long SPC Setup tlenu
Version 2.8
SPC Log m Insert Delete Hodify Rescale Charts Clear Report Utils
chart A
Lou Value
High Value
Precision
Chart B
Lou Value
High Value
Precision
I
Saved Stats?
Use * and + for options. Use 1, t, PgUp, PgDn, How, and End for retards.
Press ENlEB to run option. ESC previous menu. Fl for help. F2 change port.
Long Setup Menu: Options
Here is a brief description of the menu options in the Long
SPC Setup Menu in Figure 8.9, above. You can highlight an
option by typing the initial letter of the option, by pressing
the right (or left) arrow key, or by pressing the SPACE
BAR (or BACKSPACE) key. You can .seIect an option by
pressing the ENTER key. You can deselect a selected
option by pressing the ESC key.
-
1. SPC - Select this option to begin SPC operations using
the highlighted setup record.
2. Log - Select this option to set up multiple log files in
the Log File Menu and perform SPC operations using
any of specified log files to log SPC data (Logging
operations are described in Logging Functions on page
8-52.)
8-26