User`s manual

1.
2.
3.
4.
5.
6.
7.
8.
9.
SPC - Select this option to begin SPC operations using
the highlighted setup record.
Log - Select this option to set up multiple log files in
the Log File Menu and perform SPC operations using
any of specified log files to log SPC data. (Logging
operations are described in Logging Functions on page
8-52.)
Add - Select this option to create a new SPC setup
record in the Short SPC Setup Screen. The new setup
record is added to the end of the list of setup records in
the setup menu.
Insert - Select this option to create a new WC setup
record in the Short WC Setup Screen. The new setup
record is inserted above the highlighted setup reccrd in
the setup menu.
Delete - Select this option to delete the highlighted
setup record in the setup menu.
Modify - Select this option to modify the highlighted
setup record in the setup menu. When you select the
Modify option, the highlighted setup record appears in
the Short SPC Setup Screen.
Charts - Select this option to perform an automatic
SPC operation. For details, refer to the Automatic SPC
Setup Method section of this manual. The procedure is
basically the same.
Clear - Select this option to clear statistics from a
highlighted setup record that has “Yes” in the “Saved
Stats” column.
Report - Select this option if you want to generate a
report based on saved statistics, histograms, or the
setup record. (These reports are described in Report
Functions on page g-60.)
10. Utilities - Select this option to perform the following
utility functions:
a. “Export” an SPC setup record to a different DOS file,
either a new file or an existing file.
b. 7mport” an setup record from a DOS file in which
you have previously stored setup records.
c. Change to a different DOS file, either a new file or an
existing file.
d. Copy the highlighted setup record within the current
file.
g-19