User`s manual

appropriate configuration record, and use the Send option

to dbwnkmd thut configuration to the SLS.

Use the next step to start SPC operations at this time.

Otherwise, skip to Short Setup Menu: Options.

Flgure 8.6 Short SPC setup Menu

hart Linear Sensor

Short SPC Setup tlenu Version 2.88

m Log Add Insert Delete Modify Charts Clear Report Utilities

tleasuremnts

Use f and + for options. Use 4, t, PgUp, PgDn, Hone, and End for records.

Press MTER to run option. ESC previous mmu. Fl for help. F2 change port.

Highlight the appropriate When you press ENTER, the SPC charts appear on the

setup record, then press the

ENTER key.

display (these charts are the ones designated in the

highlighted setup record).

8-18

Short Setup Menu: Options

Here is a brief description of the menu options in the Short

SPC Setup Menu in Figure 8.6, above. You can highlight an

option by typing the initial letter of the option, by pressing

the right (or left) arrow key, or by pressing the SPACE

BAR (or BACKSPACE) key. You can select an option by

pressing the ENTER key. You can deselect a selected

option by pressing the ESC key.