User`s manual

User Experience
Related Publications
Introduction
The SLS Configuration Support Software (CSS) is a
user-friendly, menu-driven software package intended both
for configuring the SLS and for monitoring its inspection
functions. The CSS provides several additional functions,
including statistical process control (SPC), that are not
available when using the SLS alone.
The CSS is easy to install and operate on your IBM (or
compatible) personal computer (PC). Its easy-to-use “user
interface” provides several menus and data entry screens
for configuring the SLS, and several graphic displays for
monitoring inspection results while the SLS is in operation.
The menus and screens simplify SLS configuration and
operation. To access them, you can use either the keyboard
or a mouse, if your PC has one installed.
User-selectable language translations of the menus,
screens, and displays are included with the CSS.
Before using the CSS, you should be familiar with the SLS
itself and the procedures described in the SIS User’s
Manual, Catalog No. 280~NDOOl. To install the CSS in
your PC, you need only know how to insert the diskettes in
the appropriate disk drive. You do not need to be an
experienced PC user.
If you intend to use the SPC functions, you need no prior
knowledge or experience to use the simplest functions;
however, to use the full range of SPC functions included in
this software, you must be familiar with most SPC concepts
and parameters.
For information about the SLS, and the SPC and database
application programs, refer to the following publications:
l Smart Linear Sensor User’s Manual, Catalog No.
2804-NDOOl.
l SLS instruction sheet.
l DataMyte Handbook.
l DataMyte TurboSPC User’s Manual
l MetriStat User’s Manual