User`s manual

5.
6.
7.
8.
9.
SPC - Select this option to begin SPC operations using
the highlighted setup record.
Clear - Select this option to clear statistics from a
highlighted setup record that has “Yes” in the “Saved
Stats” column.
Report - Select this option if you want to generate a
report based on saved statistics, histograms, or the
setup record. (These reports are described in Report
Functions on page 8-60.)
Toggle Logging - The logging function accumulates a
log file of basic inspection results data for later use in
reports or for conversion to other formats.
Select this option to turn the logging function on if it is
off, or turn it ofSif it is on. Note that the current on-off
state of the logging function is indicated by the
message near the bottom of the menu.
Log Report - Select this option to generate a report
that is based on the data accumulated in the log fide.
You can elect to review the report on the display, print
the report, or save the report to a DOS file.
(These
reports are described in Repot? Functions on page
8-60.)
Convert Log - Select this option to convert the data
accumulated in the log file to a format that is
compatible with one of a number of other application
programs, such as Lotus 123 and MetriStat Lab. (These
log file conversions are described in Conversion
Functions on page g-54.)
Delete Log - Select this option to delete the log file.
Saved Stats-This column indicates whether saved
statistics exist for each setup record in the setup menu.
The “No” changes to “Yes” whenever you exit an SPC
operation using a setup record that has “save stats”
specified. The “Yes” changes to “No” whenever you
select the Clear option described above for the
highlighted setup record.
Results logging is On/Off-This message indicates
the current status of the logging function. You can
toggle the function on and off by selecting the Toggle
Logging option.
8-16