User`s manual

-
Conj&ration Menu (described in Chapter 5). highlight the
--
appropriate configuration record, and use the Se& option
to download that conjigumtion to the SLS.
Figure M Run-Only Short WC setup Menu
lhart Linear Sensor Short SPC Setup tlenu Uersion 2-B
m Clear Report Toggle Logging Log Report Convert Log Delete Log
Results logging is Off.
Use + and l for options. Use 1, t, PgUp, PgDn, Hone, and End for records.
Press ENTER to run option. ESC previous menu. Fl for help. FZ change port.
Highlight the appropriate
setup record, then press the
ENTER key.
When you press ENTER, the SPC charts appear on the
display (these charts are the ones designated in the
highlighted setup record).
Run-Only Setup Menu: Options and Features
Here is a brief description of the menu options and main
features in the run-only version of the Short SPC Setup
Menu in Figure 8.5, above. You can highlight an option by
typing the initial letter of the option, by pressing the right
(or left) arrow key, or by pressing the SPACE BAR (or
BACKSPACE) key. You can select an option by pressing
the ENTER key. You can deselect a selected option by
pressing the ESC key.
8-15