User`s manual

Automatic SPC
Setup Method
Your Action
Return to the Main Menu, if
you have not already done
SO.
Press the “.I?’ key to
highlight the Statistical
Process Control option,
then press the ENTER key.
and statistics that accumulated from the time that the
data display stopped.
(Alternatively, you can press the F2 key to freeze the
data display and start it again.)
17. F,se - This icon signifies that when you press the ESC
(escape) key (or “click” the icon with the mouse), the
SPC operation and data display stop, and the display
returns to the previous setup menu.
The automatic SPC setup and operation method enables
you to perform SPC operations even if you have little or no
experience with statistical process control. It is easy to use,
since all you need to do is select one of the chart options to
start the automatic SPC setup.
You may also rind this method useful when you are
investigating various chart display options and want an
automatic SPC setup to save tune.
Using the Automatic SPC Setup Method
Here is the procedure for using the automatic method of
SPC setup and operation:
Comments
When you press ENTER, the SPC Setup Menu shouti
appear on the display, as shown in Figure 8.3 on page 8-10.
8-9