User`s manual

Fields 2 and 3 contain the date and time of the trigger that
started the inspection cycle.
-
Field 4 contains the exposure time (12.2m.9).
Field S contains the inspection cycle time (25ms).
Field 6 contains the error LED status (0 = Off).
Field 7 contains the contrast LED status (0 = Off).
Field 8 contains the discrete output A LED status (1 = On).
Field 9 contains the analog output A result (26.69).
Field 10 contains the discrete output B LED status (0 =
OfQ
Field 11 contains the analog output B result (80.20).
When the conversion is completed, a message appears with
instructions for importing the file into the Lotus 123
Program.
Consult your Lotus 123 manual, if necessary, for more
information about file importation.
MetriStat Lab Format
When you select this Save Log function, the CSS displays
the MetriStat Import Setup Screen, as shown in Figure 7.6.
Figure 7.6 MeWtat import Setup Screen
Inport File Name
Ike Autenatic Date
Part ID
Characteristic ID
Sarrple Size (OPS)
Machine
Operator
Your Key
Base
HaItiplier
/
-
-I II
iI
Time? Yes
SLS on COIN
Result fi
Result B
I
1
e.mme Et.88888
i.mem 1 .&Mm
-
7-10