User`s manual

-
Monitor & Log, NO Statistics
This function selects the “Monitoring Smart Sensor”
display without the statistics under each analog bar. It stores
results data in a log file on disk.
Log Results ONLY
This function selects the “Monitoring Smart Sensor”
display without the analog bars, statistics, switch settings,
and configuration information. It stores results data in a log
file on disk.
Log File Report
This function generates a statistical report from the results
data stored in the log file. You can review the report on the
display, send it to a printer, or save it in a file on any
available disk. Figure 7.4 is an example of the Monitor
Report.
Figure 7.4 Monitor Log Report
SLS on cow1
__________________._____
wean
Standard Deviation
Wax
nin
Range
Discrete Output Count
Number of Triggers 16782
Triggers Processed 16782
Triggers Failed 0
Result A Ree"lt B Exposure Time Cycle Time
__________-_______-_____________________-~-.----------~-
26.61 80.17 11.6 25
0.10 0.00 0.0 0
26.69 80.22 11.6 25
26.25 80.15 11.6 25
0.44 0.07 0.0 0
16782 0 ___
_-
-
The log report contains the same kind of statistical data that
appears under the analog bars on the Monitoring Smart
Sensor display. In addition, it contains statistical data
pertaining to exposure times and cycle times.
7-8