User`s manual

-
Monitor Functions
l Function -This line indicates the analysis function in
the current SLS configuration. It reflects the analysis
function designated by either the DIP switch settings on
the SLS or the “SL.S Function” contained in a
downloaded configuration.
As mentioned earlier, the Monitor Menu enables you to
select the appropriate Monitor function. Figure 7.3 shows
the Monitor Menu and its functions. Note that the top four
functions in the menu perform inspection monitoring and/or
logging operations. The remaining Monitor functions
perform log conversions, generate log reports, and delete
the log tile.
Figure 7.3 Monttorhknu Functions
Nonitor 8 Log, ii0 Statistics
Lag Besll1ts ONLY
Log File Report
Saw Log to Text File / Lotus 123 .PJIN
Saue Log to MetriStat Lab Format
Save Log to Dataflyte TurboSPC .PBN Ford
Save Log to dBASE .DBF Format
Delete Monitor Log
PC Processing Speed Considerations
The speed with which your PC can process inspection
results data from the SLS may be a factor in determining
which of the three bgging functions to select. Since these
functions vary in complexity according to the type and
amount of data appearing on the display, they vary also in
the amount of PC processing time that they require.
-
7-6