User`s manual

Figure 72 Monitor Smart Sensor Display: Basic Features
Snart Linear Sensor
Nonitoring Snart Sensor
Version Z.E#
Press Fl for help. Press ESC uhen done.
Start Time: i2:B8:3f
Result B - Last edge
/
I
Hean: 74.85 Standard Deviation: ii.B8 Nax: 74.87 Nin: 74.82 Range: B.65
5
0
Switch Settings: Targeting Light Off
Setup 1 reach Hode
Dark Object
Using remote configuration
Leve 1 Ir iggered
Lighting compensation is On
Normal Lighting
Exposure Time HIS): 18.4
Remote Configuration Enabled
Cycle Tine (ml: 25
Output Normally Open
Triggers Processed : 569 of 569
High Resolution
Function: 1-D Spatial tkasurement
Monitor Display:
The features and symbols in the Monitoring Smart Sensor
Features and Symbols
display are identified in Figure 7.2, above, by the circled
callouts and are described in the following sections.
Analog Bar Graphs @
The two analog bar graphs are visual indicators of the
inspection results at the A and B analog outputs. The length
of each bar indicates the percentage value of the current
inspection result. Thus, the bar under “Result A - Fist
Edge” indicates a result of about 28% (jrst edge location
on the FOV), while the bar under “Result B - Last Edge”
indicates a result of about 75% (last edge location on the
FOV).
7-3