User Manual

Using your machine
Using the hard oor adaptor
IMPORTANT: Always check that the adaptor, wheels and brushbar are free from any dirt or debris before use.
Do not use the hard oor adaptor if it has become damaged or worn. Remove any sharp objects from the oor
that could become trapped and may scratch or damage the surface. The hard oor adaptor should be removed to
vacuum carpets.
Lie the vacuum cleaner
on its back exposing the
brushbar. Make sure the
hard oor adaptor is the
correct way round with
the wheels on the adaptor
facing down and towards
the front of the vacuum
when tted.
To remove the adaptor, pull
the front clips to unlock.
Pull and lower the adaptor,
unhooking the curved clips
from the wheels on the
base of the vacuum.
Line up the adaptor with
the base of the vacuum.
Hook the curved clips on
the back of the adaptor
under the wheels on the
base of the vacuum.
Push the hard oor
adaptor onto the base of
the vacuum until the front
clips on the adaptor click
securely into place.