Air Lift TM STEERABLE POWERFUL UPRIGHT WITH LIFT OUT CYLINDER LET’S GET STARTED.
Let’s talk safety Basic safety precautions Don’ts Do’s This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • This vacuum cleaner can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum cleaner in a safe way and understand the hazards involved.
• Only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing away from moving parts and openings whilst using the vacuum cleaner. • Only Vax recommended tools should be used with the vacuum cleaner, use of non-branded Vax accessories/tools will invalidate your warranty. • Unplug and switch off the vacuum cleaner before performing maintenance or troubleshooting checks.
Thank you for buying this Air Lift Steerable. TM Taking care of your carpets and hard floors The AirTM Lift Steerable is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and hard floor will ensure they keep their appearance for longer. You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them.
Contents Let’s talk safety Getting to know your machine AirTM Lift Steerable Pet Included with all models 3-in-1 Tool (Crevice, Dusting and Upholstery Tool) TurboTool Hard Floor Adaptor Getting started AirTM Lift Steerable Pet Max Using your machine As per AirTM Lift Steerable Pet, plus Fur ‘n’ Fluff Tool Taking care of your machine AirTM Lift Steerable Pet Pro Let’s talk technical What to do if it goes wrong Getting in touch Accessories Notes As per AirTM Lift Steerable Pet (but excludes 3-in-1 too
Getting to know your machine Hose to handle connection Hose cord hook Handle Extension tube Dirt container release button Power On/Off button Cylinder lift-out button Handle release clip Brushbar On/Off button Carry handle Quick release cord hook Dirt container lid release clip Separator 3-in-1 Tool storage clip Hose Dirt release button (hidden) Hose end clip Hose holder Quick release cord hook Lower hose Brushbar indicator light Air vent Brushbar Technical Specification Name AirTM Lift St
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin cleaning WARNING: Always switch off the vacuum cleaner before connecting or disconnecting the lift out cylinder/ hose/attachments or removing and emptying the dirt container. IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off.
Using your machine - The full unit Using with the lift out cylinder attached Twist the quick release cord hooks and release the power cord. Plug the vacuum cleaner into the mains and switch on. Hook the cord onto the handle cord hook so that the cord does not get pulled, caught or tangled in the machine during use. Place foot on the floorhead and pull the handle backwards to recline. Press the On/Off button to switch the vacuum cleaner on.
Using your machine - The full unit Using the hose/extension tube/accessories with the lift out cylinder attached Always switch off the vacuum cleaner before connecting or disconnecting the hose/ tools. Hold the lift out cylinder by the carry handle at all times when using the hose and accessories. For easier cleaning detach the lift out cylinder for stair and above floor cleaning. Press the hose end clip and pull to remove the hose from the hose holder. Choose an accessory.
Using your machine Using the hard floor adaptor IMPORTANT: Always check that the adaptor, wheels and brushbar are free from any dirt or debris before use. Do not use the hard floor adaptor if it has become damaged or worn. Remove any sharp objects from the floor that could become trapped and may scratch or damage the surface. The hard floor adaptor should be removed to vacuum carpets. Lie the vacuum cleaner on its back exposing the brushbar.
Using your machine - The lift away Using the hose/extension tube/accessories with the lift out cylinder detached CAUTION: Hold the lift out cylinder by the carry handle at all times when the lift out cylinder is detached for stair and above floor cleaning. Only attach the hose to the vacuum cleaner with the lift out cylinder attached. Press the hose end clip and pull to remove the hose from the hose holder. Hold the carry handle and press the lift out release button.
Taking care of your machine IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the machine for blockages and clean the filters . Wash the filters with warm water (40°C max) and leave for 24 hours or until fully dry before replacing into the machine.
Taking care of your machine Cleaning the separator Lift the dirt container lid release clip. In a hinge like manor lift the dirt container lid. Pull the pre-motor filter tab and remove the filter from the dirt container. Lift and remove separator out of dirt container. Using a soft brush remove any dirt/debris from separator. Re fit the separator making sure the semi circular tab on the separator fits into the groove on the dirt container.
Let’s talk technical IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks. If the brushbar has been obstructed, the brush bar motor protection sensor may have been activated. The brushbar will stop and the light on the floorhead will illuminate red. Resetting/removing debris from the brushbar The brushbar indicator light will illuminate red and the brushbar will stop spinning if the brushbar is obstructed.
Let’s talk technical Changing the belt Using a crosshead screwdriver, remove 3 screws from the belt cover on the side of the floorhead. Pull to remove the belt cover. Pull to remove the brushbar location plate. Remove belt. Clean any debris from spindle. Place new belt onto spindle, lining up teeth on the belt over and onto the cog. Pull and remove the hose from the hose holder. Pull and stretch the hose, any blockage in the hose should then be visible.
What to do if it goes wrong Problem There is an accessory missing Why does my vacuum cleaner have no power? Why won’t the vacuum cleaner pick up? Why isn’t my brushbar rotating? Why is there a red light on my floorhead? Why is dust escaping from the vacuum? Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your vacuum cleaner. • The plug may not be fully pushed into the electrical socket.
Getting in touch † Registration required. Terms and conditions apply, see vax.co.uk for details.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro Cleaning Kit (Type 2) 1-1-133326 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on top of cupboards and in between blinds to the dust that collates behind and within the radiator.
Notes
GET IN TOUCH info@vax.co.uk vax.co.uk EU Statement of Compliance: Manufacturer/EU importer: Vax Limited, hereby on our own responsibility, declare that the UCPESHV1, UCPMSHV1, UCUESHV1 and UCSUSHV1 are manufactured in compliance with the following Directives: Safety: 2014/35/EU Low Voltage Directive. EMC: 2014/30/EU Electromagnetic Compatibility Directive. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
