MachAir POWERFUL AND LIGHTWEIGHT LET’S GET STARTED.
Let’s talk safety Basic safety precautions Don’ts Do’s Please keep instructions for further use and use only as instructed in this guide. This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • Only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing away from moving parts and openings whilst using the vacuum cleaner.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • Only Vax recommended tools should be used with this vacuum cleaner.
Thank you for buying this Mach Air vacuum cleaner. Taking care of your carpets and hard floors The Mach Air is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and hard floors will ensure they keep their appearance for longer. You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them.
Contents Let’s talk safety Getting to know your machine Included with your machine Mach Air 2-in-1 Tool (Crevice Tool, Dusting Brush) Getting started Using your machine Taking care of your machine Mach Air Revive 3-in-1 Tool (Crevice Tool, Dusting and Upholstery Tool) Accessories What to do if it goes wrong Getting in touch Mach Air Energise 2-in-1 Tool (Crevice Tool, Dusting Brush) Fur ‘n’ Fluff Tool Initial setup for normal operation 1. Use the base accessories.
Getting to know your machine Hose to extension tube connector Handle Extension tube Upper handle release button Power on/off button Dirt container release button Brushbar on/off button Carry handle Quick release cord hook Power cord Separator Dirt container Hose to machine connector Post-motor filter cover Hose Air vent Rotating brushbar Wheels Technical Specification Accessories & Consumables Name Mach Air Series Voltage 220-240V Wattage 820W Capacity 1.
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE. Assembling your upright Insert the handle. Place the tool onto the on-board storage area. How to use Twist the quick release cord hook to release the power cord. Plug in your machine and push the ON/OFF button to switch on. Brushbar on — carpets Brushbar off — hard floors Recline the vacuum. NOTE: The brushbar will not spin until the machine is reclined.
Using your machine Before you begin cleaning • Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. • The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat, the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from the electrical socket.
Taking care of your machine How to use the air vent Slide the vent cover open to decrease suction, if required on high piled carpets. Close the vent cover to increase suction, for maximum cleaning on hard floors. NOTE: For most efficient results the air vent should be closed. Emptying and cleaning the dirt container Press the dirt container release button and pull to remove the dirt container. Hold the dirt container over a bin and press the dirt container release button allowing dirt to fall out.
Taking care of your machine Cleaning the shroud Turn the dirt container lid anti-clockwise… …and lift to remove. tap Lift to remove the separator from the dirt container Tap over a bin to remove dirt and debris. Brush dirt from the shroud. HEPA post-motor filter maintenance IMPORTANT: The exhaust filter is designed to offer long life with no maintenance. The filter should be checked periodically and when heavily discoloured it should be replaced.
Taking care of your machine CAUTION: To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical outlet before performing maintenance/troubleshooting checks. Removing debris from the brushbar Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar. Changing the brushbar IMPORTANT: Unplug and switch off the vacuum cleaner before maintenance or troubleshooting checks.
Taking care of your machine Removing blockages from the TurboTool A B Using a crosshead screwdriver, remove the 2 screws (A) to clean the TurboTool. Remove the cover (B). Clean out any debris or hair from the brushbar and turbine fan. Replace the cover and tighten the screws. WARNING: To reduce the risk of injury from moving parts, unplug from the mains before carrying out any maintenance. The brushbar is equipped with bearings which contain sufficient lubrication for their lifetime.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions 3-in-1 Tool 1-1-129167 The 3-in-1 Tool includes a crevice tool for awkward areas and corners, dusting brush for areas such as skirting, and an upholstery tool for cleaning sofas, curtains, chair seats and car interiors. Pro cleaning kit 1-1-133326 All our best tools in one kit that makes cleaning your home quicker, easier and with even better results.
What to do if it goes wrong Problem There is an accessory missing Why does the vacuum cleaner have no power? Why won’t the vacuum cleaner pick up? Why isn’t the brushbar rotating? Why is dust escaping from the vacuum? Solution • Check the contents panel on the back of the box to make sure the part is included with your vacuum cleaner. • The plug may not be fully pushed into the electrical socket. • Check if the fuse in the plug needs replacing and always replace with a 13amp British fuse.
Getting in touch † Registration required. Terms and conditions apply, see vax.co.uk for details.
GET IN TOUCH info@vax.co.uk vax.co.uk Vax Ltd, Pointon Way, Stonebridge Cross Business Park, Hampton Lovett, Droitwich, WR9 OLW, UK EU Statement of Compliance: Manufacturer/EU importer: Vax Limited, hereby on our own responsibility, declare that the UCA1GEV1, UCA2GEV1 and UCA3GEV1 are manufactured in compliance with the following Directives: Safety: 2014/35/EU Low Voltage Directive. EMC: 2014/30/EU Electromagnetic Compatibility Directive.
