User guide

vax.co.uk

assembly

3. How to Assemble

IMPORTANT: Always unplug the vacuum cleaner

from the electrical outlet before assembling or

removing the accessories.

Tool required: Phillips screwdriver

1. Slide the back panel onto the base (Fig.3/1).

2. To secure, insert the two (2) screws into the front of the

back panel (Fig.3/2).

3. Slide the end of the lower hose onto the side connector

(Fig.3/3).

4. Place the upper handle onto the upright back panel

(Fig.3/4).

5. Insert locking part into slot (Fig.3/5).

6. Insert the screw into the back of the handle and screw

it into the locking part. Tighten until secure (Fig.3/6).

Fig.3/1

Fig.3/2

Fig.3/3

Fig.3/5

Fig.3/6

Fig.3/4

Back of

unit

U90-P5 & U90-P6 Series User Guide v1.2.qxd:UG 13/5/10 14:46 Page 4