User guide

Before you begin
Push the handle into
main body until it clicks
into place.
Fit upholstery tool into
storage clip.
Fit 2-in-1 crevice tool
and dusting brush onto
storage clip.
Insert hose into hose
entry point, press hose
end clip and attach
over raised rim.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
IMPORTANT: Always switch o the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner o
and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum
cleaner to cool for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters to fully dry
before putting back into the machine).
Filters require cleaning at least every 3 to 6 months.
If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.