User guide

Removing debris from brushbar
IMPORTANT: Any obstruction or blockage will automatically stop the brushbar rotating.
Let’s talk technical
A RED light will indicate
a jammed brushbar.
Using a crosshead screwdriver,
remove 3 screws from thebelt
cover on the side of the oorhead.
Lift and separate
brushbar side cover.
Using a pair of scissors, cut any
hair or debris free from around
the brushbar.
Pull to remove the belt cover. Pull to remove the brushbar
location plate. Remove belt.
Pull brushbar through
brushbar side cover
to remove.
Using a pair of scissors cut any
hair or thread free, remove any
dirt or debris from brushbar.
Changing the brushbar/advanced brushbar cleaning
TIP
To test for a blockage in hose,
drop a small ball of paper
through the hose. The paper
will drop through if the hose
is clear.
Stand the vacuum cleaner in the
upright position. The brushbar
should automatically reset.
A GREEN light indicates no
blockages in the brushbar.