Air Steerable Let’s get started U88-AM-Be / U88-AM-Pe / U88-AM-Te / U88-AM-Re / U87-AM-Ce Series vax.co.
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. Basic safety precautions • Only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing away from moving parts and openings whilst using the vacuum cleaner. • Don’t use the vacuum cleaner if it has been dropped, damaged or left outdoors.
• This vacuum cleaner can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum cleaner in a safe way and understand the hazards involved. Children shall not play with the vacuum cleaner. Cleaning and user maintenance shall not be made by children without supervision.
Thank you for buying this Air Steerable Taking care of your carpets and hard floors The Air Steerable is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and hard floors will ensure they keep their appearance for longer. You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them.
Contents Let’s talk safety Getting to know your machine Getting started Using your machine Air Steerable (Included with all models) Included with your machine 2-in-1 Crevice tool and Dusting brush Upholstery tool Air Steerable Pet Taking care of your machine TurboTool Let’s talk technical Air Steerable Reach Accessories Flexi-crevice tool What to do if it goes wrong Getting in touch 2.
Getting to know your machine Handle Brushbar On/Off button Power On/Off button Dirt container release button Carry handle Handle release button Dirt container lid Inner cyclones Quick release cord wrap Shroud Upholstery tool storage clip Dirt container 2-in-1 tool storage clip Separator Post-motor filter cover/Post-motor filter (hidden) Hose end clip Hose entry point Power cord Brushbar reset button (hidden) Hose Brushbar blockage indicator light Rotating Brushbar Technical Specification Acc
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin IMPORTANT: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug.
Using your machine IMPORTANT: The brushbar should be ON for carpets and OFF for hard floors. Plug into mains and press On/Off button to switch On. Place your foot onto the floorhead and pull handle backwards to recline. Pressing the brushbar On/Off button when the brushbar is spinning will de-active the brushbar. Move the handle side to side to manoeuvre under and around furniture. Press the brushbar On/Off button to activate the brushbar.
Using your machine IMPORTANT: Always switch off the vacuum cleaner before disconnecting or connecting hose and accessories. The accessories can be attached to the handle using as a telescopic extension tube or directly to the hose. Attaching tools to the hose Press the hose end clip, pull hose to release. Push hose and accessory together, press hose end clip and attach over raised rim on accessory. Choose an accessory.
Using your machine IMPORTANT: Always take extra care when cleaning the stairs, stand the base of the vacuum cleaner flat on the floor at the bottom of the stairs. Using the stretch hose (Reach model only) Remove the accessory hose from the machine. Remove stretch hose. Attach the accessory hose to machine hose using the clip end. Remove the handle from the body of the machine. Attach hose to the top of handle. Use handle and accessory hose to reach high places for cleaning.
Taking care of your machine IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the machine for blockages and clean the filters . Wash the filters with warm water (40°C max) and leave for 24 hours or until fully dry before replacing into the machine. Filters require cleaning at least every 3-6 months (depending on the level of use).
Taking care of your machine IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks. Advanced cleaning of shroud and separator Turn skirt on shroud clockwise to unlock and remove. Turn middle section of shroud clockwise to unlock and remove from separator. Using a soft brush, remove any dirt/debris from the shroud and separator. Post-motor filter maintenance IMPORTANT: The exhaust filter is designed to offer long life with no maintenance.
Let’s talk technical IMPORTANT: Any obstruction or blockage will automatically stop the brushbar rotating. Removing debris from brushbar A RED light will indicate a jammed brushbar. Stand the vacuum cleaner in the upright position. The brushbar should automatically reset. Using a pair of scissors, cut any hair or debris free from around the brushbar. A GREEN light indicates no blockages in the brushbar. TIP To test for a blockage in hose, drop a small ball of paper through the hose.
Taking care of your machine Changing the belt Using a crosshead screwdriver, remove 3 screws from the belt cover on the side of the floorhead. Pull to remove the belt cover. Pull to remove the brushbar location plate. Remove belt. Clean any debris from spindle. Place new belt onto spindle, lining up teeth on belt over and onto cog. Removing blockages from the TurboTool (some models only) Locking ring Slide off the locking ring. Line up the tabs on front of housing and re-fit.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro Cleaning Kit (Type 2) 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on top of cupboards and in between blinds to the dust that collates behind and within the radiator. TurboTool (Type 5) 1-1-134419-00 A TurboTool for your vacuum cleaner.
What to do if it goes wrong Problem Is there an accessory missing? Solution • Check the ‘Getting Started’ page in this guide or the box that the machine came in to make sure that the part is definitely included in your unit if it is missing, we’re here to help. Simply call us on 0330 026 8455. Why does my vacuum cleaner have no power? • It may not be plugged into the electrical socket correctly. Check the plug is pushed into the electrical socket securely. • The electrical socket may not be working.
Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling. † Registration required. Terms and conditions apply.
Notes
Notes
@VaxUK Vax Ltd., 5th Floor 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6BN, UK email: info@vax.co.uk website: vax.co.uk EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the U88-AM(Be/Pe/Te/Re) / U87-AM-Ce is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.
