Designed in the UK Zoom User Guide U87-ZM-B / U87-ZM-P / U87-ZM-R / U87-ZM-PF vax.co.uk Performance is everything.
Contents 1 Contents 1 Machine Overview 2 General Safety Information 3 Getting Started 4 How To Use 5 Looking After Your Machine — Filters and Dirt Container 6 Looking After Your Machine — Filters 7 Looking After Your Machine — Removing Blockages 8 Looking After Your Machine — Brushbar 9 FAQs 10 Other Information 11 Guarantee 12
Machine Overview 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Handle Telescopic extension tube Dirt container release button Power on/off button Separator Dirt container Hose holder Post-motor filter cover Hose to machine connector Carpet height adjuster TurboTool holder Handle release button Quick release cord wrap Hose Cord Flexi crevice tool (available with U87-ZM-PF) 17 Fur & Fluff tool (available with U87-ZM-PF) 18 3-in-1 crevice, dust and upholstery tool 19 TurboTool (available with U87-ZM-P, U87-ZM-PF, U8
General Safety Information This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. Please keep instructions for further use. When using the vacuum cleaner basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the on/off switch on the vacuum cleaner controls before disconnecting or connecting from the mains supply. 3.
Getting Started PLEASE READ SAFETY INFORMATION BEFORE USE (p3) Before plugging the cord into the electrical outlet, make sure the switch is in the ‘off’ position. Hold the vacuum cleaner firmly when starting and in use. Assembling your upright Insert the backbone into the floorhead. Insert the cord holder into the hole at the bottom of the product backbone. Now take the small clip and push it down between the end of the cord holder and the machine, to lock the cord holder in place. 1.
How To Use NOTE: Please select the hard floor setting on the brushbar height adjustment dial when using on hard floor, vinyl or lino to ensure the brushbar is in the highest position to avoid damaging your floor. NOTE: This unit has a constantly rotating brushbar. The Height Adjust dial must be set to the highest mode before using the hose and attaching accessories. How to use Twist the cord holder to release the cord. Choose your desired carpet height or hardfloor setting.
Looking After Your Machine – Filters and Dirt Container NOTE: Wash filters with warm water (40°C max) at least every 3 months for best cleaning results. For detailed information on maintaining your vacuum cleaner and its filters, please refer to the full user guide at vax.co.uk/support Emptying and cleaning the dirt container Press dirt container release button to remove the dirt container.
Looking After Your Machine – Filters Cleaning the shroud 40˚C MAX Turn the dirt container lid anti-clockwise to remove. Remove the pre-motor filter to allow access to the shroud. Tap the shroud over a bin to release dirt. Cleaning the post-motor filter Remove the exhaust cover under the bin to find the post motor filter. Remove the filter. 40˚C MAX Tap the post-motor filter over a bin to release the dirt.
Looking After Your Machine – Removing Blockages IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. Removing debris from the brushbar Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar. Removing blockages from the TurboTool 1 vax.co.
Looking After Your Machine – Brushbar Changing the belt Switch off your vacuum cleaner at the main socket and unplug. Unclip the 2 small wheels from the base of the vacuum to enable you to remove the screws from behind. Note: The screw for the height adjuster dial is located here. Remove the 9 screws from the base of the floorhead cover. Place the belt by attaching it to the brushbar and hooking it onto the metal side. 9 Remove the floorhead cover.
FAQs Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. Is there an accessory missing? • Check the ‘Getting Started’ page in this guide or the box that the machine came in to make sure that the part is definitely included in your unit. • If it is missing, we’re here to help.
Other Information UK Service & Help Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the Vax Careline. Calls are charged at the UK local rate. Please have your machine with you when calling. Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Monday-Friday 8.30am to 6.30pm Saturday-9.00am to 5.00pm Consumables To purchase spares and accessories, please visit vax.co.
Guarantee It’s quick and easy to register for your FREE 2 year guarantee online at: vax.co.uk/guarantees Please retain your original receipt for proof of purchase. UK based customer care centre — Open 6 days a week Monday-Friday 8:30am-6:30pm Saturday 9:00am-5:00pm we’re here if you need us Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308 Let us know what you think @VaxUK Designed in the UK 2 vax.co.
Notes 13 Machine Overview
Guarantee Notes vax.co.
COMMERCIAL Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk vax.co.uk Performance is everything.
