User guide

---
4
Operation
Assembling your vacuum cleaner
Push the lower back panel onto the
base of the unit.
Secure with the two long
screws provided.
Slide end of the hose into the
hose connector.
Attach handle to the back panel by
pushing down firmly.
Secure locking pin with the small
screw provided.
Insert locking pin into place at the
bottom of the handle.
Connect hose. Attach dirt container and click
into place.
Keep your Vax like new
IMPORTANT: The condition of the filters affects the performance of
your machine. Please check and wash filters at least every three
months. For full cleaning instructions, see pages 7 and 8.
IMPORTANT: Do not use the vacuum cleaner without all of the filters
in place and fitted the correct way up – insert the lip of the filter into
the filter cover and push up.
U87-TF-PP Series UG_User guide 10/06/2013 14:22 Page 4