User guide

Unit must be in the upright
position to change the oor mode
WARNING
Before you begin cleaning
• Always switch o and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or
removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner o and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters to
fully dry before putting back into the vacuum machine)
• For best cleaning results lters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.
Push the on/o switch to
turn machine on
Place your foot gently on the
oorhead and pull the handle
backwards to recline the machine
Getting started Using your machine
Remove hose end from
the oorhead
Choose an accessory* Attach accessory
to hose end/extension
tube/adapter
Push the quick release
cord hook to one side to
release the power cord
Turn the height adjuster
dial backwards for the
carpet setting
Turn the height adjuster dial for-
wards for the hard oor setting,
the oorhead will tilt forward
*Not applicable for all models
Using accessories
Attach extension tube/
adapter if necessary to
hose end