User guide

Changing the belt
Changing the belt
Switch o your vacuum
cleaner at the main socket
and unplug. Remove the
6 screws on the bottom
of the oorhead
Lift the brush from the
machine starting at the
side without the belt on
Squeeze the sides of the
oor plate to release it
Unhook the belt from the
motor spindle in the belt
compartment. (This may
be easier if you use a
screwdriver to do this)
Remove the oor plate
Place the new belt
around the brush bar
Remove the belt cover
Let’s talk technical Let’s talk technical
Feed the other side into
the belt compartment
Using a screwdriver,
hook the belt onto the
motor spindle
Reinsert the brushbar. One end of the
brushbar has a square slot, and one end
has a circular slot, ensure that it is put
back into the correct position