User guide
TIP
For best cleaning results lters
require cleaning at least every
3 months
Turn the dirt container lid
anti-clockwise and lift
to remove
Turn the post motor lter
cover anti-clockwise to
unlock and remove
T
A
P
MAX
40˚C
Cleaning the shroud
Cleaning the post motor lter
Taking care of your machine Taking care of your machine
To gain access to the shroud,
use the tab on the lter to pull
the lter out of its housing
and remove
Grasp the tab on the top of the
lter and pull to remove
Tap the shroud over a bin
to remove dirt and debris
Wash shroud under running
water and leave for a minimum of
24hours to fully dry. If the shroud
is not tted correctly it can prevent
the dirt container closing
MAX
40˚C
T
A
P
24hr
MAX
40˚C
T
A
P
24hr
MAX
40˚C
T
A
P
24hr
Tap the lter over a bin to
remove the dirt.
Wash the lter under running
water (40 degrees max).
Leave to fully dry for at least
24 hours before retting back
to the vacuum