User guide

Cleaning the pre-motor lter
Emptying and cleaning the dirt container
Taking care of your machine Taking care of your machine
Turn the dirt container lid
anti-clockwise and lift
to remove
Press dirt container release
button to remove the
dirt container.
Hold dirt container over a bin
and unclip the lock on the
bottom of the dirt container,
allowing the dirt to fall out.
Use the tab on the lter to pull the
lter out of its housing.
When attaching the dirt container
back onto the vacuum, align the base
rst then push until you hear an
audible click which indicates the dirt
container is locked into place
MAX
40˚C
T
A
P
24hr
MAX
40˚C
T
A
P
24hr
Tap the lter over a bin to
remove any dirt and debris
Wash the lter under running
water (40 degrees max).
Leave to fully dry for at least
24 hours before placing back
into your vacuum
MAX
40˚C
T
A
P
24hr
Don’t over ll the
container to avoid
clogging the lter