User guide

www.vax.co.uk

assembly / operation

15. To secure the dirt container push the top in place,

there will be an audible click when it is secure (Fig.3/15).

4. How to Operate

Cord Release

Release the power cord by turning the quick cord release.

The cord should be inserted into the cord guide while

vacuuming to keep it out of the way (Fig.4/1)

Adjustment for Different Floor Types

Slide the height adjust lever to match the surface being

cleaned (Fig.4/2).

NOTE: For easiest adjustment, place cleaner in full

upright position.

CAUTION: The brushbar continues to rotate at

all times while the vacuum cleaner is on. Keep

hair, loose clothing, fingers and all parts of the body

away from the brush area while the vacuum cleaner

is on. The vacuum cleaner must be in the upright

position to lift the rotating brushbar off the carpet

when cleaning above the floor. Vax recommend that

the brushbar height adjust is turned to its highest

position when using the tools.

On/o

ff P

edal

Plug the cord into the electrical outlet. Turn the vacuum

cleaner on by depr

essing the foot switch located on the

back left side of the vacuum cleaner (Fig.4/3A). The

vacuum cleaner can be turned off by pressing the on/off

switch again.

Fig.3/14

Fig.3/15

Fig.4/1

Fig.4/2

Vax V-060 User Guide.qxd 5/4/07 16:47 Page 6