User guide

www.vax.co.uk
12
Clearing Blockages from the TurboTool
1. Rotate the locking ring 180º and then turn the
TurboTool® over (Fig.8/5).
2. Pivot lowering housing and remove any blockage
(Fig.8/6).
3. To re-assemble, ensure that the tabs are engaged. Pivot
the lower housing closed and rotate the locking ring 180º
(Fig.8/7).
clearing blockages
Fig.8/4
LOCKING RING
Fig.8/5
Fig.8/6
TABS
Fig.8/7
Vax V-060 User Guide.qxd 5/4/07 16:47 Page 12