User`s guide

Table B–3 (Cont.): Uniform SETUP Modes for LG01, LG02, LJ250, LN03, and
LQP02 Printers
Modes and
Controls LG01 LG02 LJ250 LN03 LQP02
PAGELENGTH Yes Yes Yes Yes Yes
PORTRAIT — Yes — Yes —
RESET Yes Yes Yes Yes Yes
[NO]TABS:n — — — Yes Yes
TEXT — Yes Yes Yes —
[NO]UNDERLINE Yes Yes Yes Yes Yes
UP — Yes Yes — —
VERTICAL Yes Yes Yes — —
[NO]WRAP — Yes Yes Yes Yes
B.2 Nonuniform SETUP Mode and Control Support for Printers
The following SETUP modes and controls act in a manner specific to particular
printers. That is, the action of the mode or control depends on the printer you are
using. Dashes (—) indicate no support.
Table B–4: Nonuniform SETUP Modes and Controls for LA50, LA75, LA100, and
LA210 Printers
Modes and
Controls LA50
Turbo LA75
and LA75† LA100‡ LA210‡
DENSE — Medium Density Letter Mode,
High Density
—
DRAFT Draft Draft Draft Draft
LETTER Hor:10 Medium Density
Hor:10
Letter Mode
Medium Density
Hor:10
Hor:10
LISTING Draft
Hor:16.5
Draft
Hor:16.5
Draft
Hor:16.5
Draft
Hor:16.5
MEMO Enhanced Density High Density
Hor:10
Letter Mode
Medium Density
Letter Mode
Medium Density
†At default setting (NLQ and LQ panel lights off). In NLQ or LQ mode, the set (panel) mode overrides SETUP
character density modes such as DENSE, DRAFT, and so on.
‡Set the LA100 and LA210 printers to AUTO mode before issuing SETUP commands.
Printer Support for the SETUP Command B–3