User`s guide

SETUP
The Professional 350 has eight primary color values for GREEN and RED and
four values for BLUE. Primary color intensity changes with values 0, 2, 4, 6, 8,
10, 12, and 14 for GREEN and RED, and changes with values 0, 4, 8, and 12 for
BLUE. See the following table:
Value Blue Green Red
0 change change change
1
2 change change
3
4 change change change
5
6 change change
7
8 change change change
9
10 change change
11
12 change change change
13
14 change change
15
The Professional 380 implements the full range of values (0–15) in primary color
amounts. For example, the following command first sets BLUE to medium, with
a little GREEN and no RED. The command then generates a medium-blue text
that contains a little green:
SETUP SETCOLOR BLUE GREEN:1,BLUE:7
SETCOLOR color FACTORY
(Valid for Professional color terminals only) Sets the specified color to the
distributed setting.
SHIFT
Sets the
LOCK
key so that it can enable all keys to enter their alternate (shifted)
function. In this mode, the
LOCK
key serves the same function as the shift lock
key on a typewriter.
292 RT–11 Command Descriptions