User`s guide

SETUP
United Kingdom GB
United States USA
See Appendix C for further information on the NRC character set.
LETTER
Sets the dot-matrix serial-line printer or hard-copy terminal to DENSE and
HORIZONTAL:10.
LIGHT
Displays dark characters on a light screen background or reverses text and
background colors on a Professional color video monitor.
LISTING
Sets the dot-matrix printer or hard-copy terminal to DRAFT and HORIZON-
TAL:16.5.
[NO]MARGINBELL
(Valid for Professional 300 series terminals only) MARGINBELL causes the
terminal to beep when the cursor is eight characters from the right margin.
NOMARGINBELL, the default, disables the terminal’s beep when the cursor is
eight characters from the right margin.
MEMO
Changes the printer or hard-copy terminal dot matrix from 8-x-9 to 16-x-9 dots.
MEMO causes more fully formed characters to be printed; they are more legible
than DRAFT. MEMO can be used with some hard-copy terminals.
[NO]NEWLINE
NEWLINE causes
RETURN
to generate a <CR><LF> (return, line feed)
combination. RT–11 automatically generates a line feed, so setting NEWLINE
sends two line feeds.
NONEWLINE causes
RETURN
to generate only a return. However, RT–11
generates a line feed; so, setting NONEWLINE generates one <CR><LF> (return,
line feed) combination.
PAGELENGTH:n
Sets the n number of lines printed on a page. Valid values for n are 0 to 252. If
the argument is 0, the printer or hard-copy terminal ignores form feeds.
PORTRAIT
(Valid for LN03 laser printers only) Sets the LN03 printer to print across the
narrower dimension of the page. This is the default. If the paper dimensions
are 8 1/2 x 11 inches, PORTRAIT sets the LN03 to print across the 8 1/2-inch
dimension.
290 RT–11 Command Descriptions