User`s guide

SETUP
[NO]INTERLACE
INTERLACE enables the screen to display high-resolution graphics.
To use INTERLACE mode with the graphics utility (GIDIS), issue the SETUP
INTERLACE command before running GIDIS. You must exit GIDIS before
changing the INTERLACE mode.
NOINTERLACE disables INTERLACE (high-resolution graphic) mode. This is
the default.
JUMP
Scrolls new lines on the screen as fast as the processor sends them to the
terminal. Reading lines in JUMP mode is difficult at higher baud rates.
LANDSCAPE
(Valid for LN03 laser printers only) Sets an LN03 printer to print across the
wider dimension of the page. If the paper dimensions are 8 1/2 x 11 inches,
LANDSCAPE sets the LN03 to print across the 11-inch dimension.
LANG:code
(Valid for Professional 300 series processors only) Defines the character set
of your console terminal and line printer. The command sets the keyboard’s
character set to the specified code.
You can specify one language code for the terminal and another language code
for the terminal screen. When you set KB LANG:code, only the keyboard is set to
the specified language code. The terminal screen font remains unaffected. When
you set VIDEO LANG:code, only the terminal screen font is set to the specified
language code. The keyboard remains unaffected.
The Professional 300 series terminal display can be disrupted when changing
from one video font to another. The valid codes with the countries they specify
are as follows. USA is the default code:
Country Code
Australia AUS
Austria A
Belgium B
Canada (English) CDNE
Canada (French) CDNF
Denmark DK
Finland SF
France F
Germany D
Ireland IRL
Italy I
Netherlands NL
New Zealand NZ
Norway N
Spain SP
Sweden S
Switzerland (French) CHF
Switzerland (German) CHD
RT–11 Command Descriptions 289