User`s guide

SETUP
• Sets the ORIGIN mode to ABSOLUTE.
• Sets wrap to OFF.
• Sets CURSOR KEY mode to CURSOR ON.
• Sets KEYPAD mode to NUMERIC.
• Sets INSERT/REPLACE mode to REPLACE.
[NO]CLICK
(Valid for Professional terminals only) CLICK, the default, causes the keys to
click when you press them.
NOCLICK causes the keys to make no sound when you press them.
CLOCK SHOW
(Valid for Professional 300 series time-of-year clocks only) Displays the current
settings of:
DATE mode (BCD or binary)
12/24 HOUR mode (12 or 24 hour)
Daylight Saving Time (DST) enable (on or off)
COLOR
(Valid for Professional 300 series processors only) Set COLOR only if you have a
color terminal. COLOR enables your color terminal to support color functionality
with utilities such as GIDIS.
MONO
(Valid for Professional 300 series processors only) Tells your processor that your
terminal is not a color terminal. This is the default. Set MONO mode when your
processor does not have a color terminal.
[COLOR1] [ON COLOR2]
(Valid for Professional color terminals only) COLOR1 ON COLOR2 specifies the
color (COLOR1) of the text and the color (COLOR2) of the screen background.
You can specify any of the following colors for COLOR1 and COLOR2: red, yellow,
blue, green, black, white, magenta, and cyan.
The following command displays green text on a blue background:
.SETUP GREEN ON BLUE
You can specify colors for only the text or only the screen background. The
following command assigns blue for the text but does not change the background
color:
.SETUP BLUE
The next command assigns blue for the screen background but does not change
the text color:
.SETUP ON BLUE
286 RT–11 Command Descriptions