User`s guide

SETUP
Table 3 (Cont.): Summary of SETUP Modes
Mode Type Description
UNDERSCORE Terminal Displays the cursor as an underscore
(Professional only).
UP Terminal/Printer Moves the print up 1/2 inch for alignment.
VERTICAL:n Terminal/Printer Prints n lines per inch.
VT100 Terminal Sets terminal into VT100 specific mode.
[NO]WRAP Terminal/Printer Enables [disables] wrapping around to the
following line.
Modes
12HOUR
(Valid for Professional 300 series processors only) Converts the contents of the
time-of-year clock to 12-hour mode and puts the clock in 12-hour mode.
24HOUR
(Valid for Professional 300 series processors only) Converts the contents of the
time-of-year clock to 24-hour mode and puts the clock in 24-hour mode. For
example, 1:00 PM is represented as 13:00.
132COLUMNS
Sets your terminal to display 132 characters on each line. 132COLUMNS
cannot be used with the Professional series processors when running under an
unmapped monitor.
80COLUMNS
Sets your terminal to display 80 characters on a line.
[NO][480]INTERLACE
(Valid for Professional 380 series processors only) 480INTERLACE enables the
screen to display graphics at a higher resolution than INTERLACE mode.
NOINTERLACE disables 480INTERLACE (high-resolution graphic) mode. This
is the default.
ANSWERBACK:/message/
(Valid for Professional terminals only) Lets you store up to 20 characters in a
message that is automatically transmitted from the terminal to the computer at
power up. The message must be enclosed by delimiters such as slashes (/) that
are not part of the message.
284 RT–11 Command Descriptions