User`s guide

SETUP
Table 3 (Cont.): Summary of SETUP Modes
Mode Type Description
DARK Terminal Displays light characters on a dark
background.
DATA National
Replacement
Sets NRC language for data processing
characters (Professional only).
DATE:dd:mmm:yy Clock Sets the system date as specified.
DEFAULTS Control Returns the terminal to its factory settings
(Professional terminal only).
DENSE Terminal/Printer Overlaps two sets of dots for a close
approximation of letter-quality printing.
DOWN Terminal/Printer Moves the print down 1/2 inch for
alignment.
DRAFT Printer Sets print to an 8-x-9 dot matrix.
[NO]DST Clock Puts the system clock into [non]daylight
savings time mode (Professional only).
GENERIC100 Terminal Sets the reply to a device ID query as a
generic VT100.
GRAPHIC Terminal/Printer Enters GRAPHIC mode.
HELP Control Lists brief descriptions of the SETUP
commands.
HORIZONTAL:n Terminal/Printer Prints n characters for each inch.
[NO]INTERLACE Terminal Enters [exits] INTERLACE mode.
JUMP Terminal Scrolls lines across screen as fast as
received.
LANDSCAPE Printer Sets printer for wider page dimension
(LN03 laser printers only).
LANG:xxx Terminal/Printer Enables the font and for the specified
country code (Professional only).
LETTER Terminal/Printer Enables enhanced density and 10 charac-
ters per inch.
LIGHT Terminal Enables the display of dark characters on a
light background.
LISTING Terminal/Printer Enables normal density and 16.5 characters
per inch.
[NO]MARGINBELL Terminal Enables [disables] bell 8 columns from right
margin (Professional only).
MEMO Terminal/Printer Enables memo quality printing.
282 RT–11 Command Descriptions