User`s guide

SET NL

(NL)

Sets the NULL handler.

Format

SET NL condition

Condition

[NO]SYSGEN

SYSGEN causes NL to match the current monitor’s SYSGEN parameters. Issue

SET NL SYSGEN if you receive an error message indicating conﬂicting SYSGEN

options when you attempt to install NL.

NOSYSGEN inhibits NL from installing under the current monitor. SET NL

NOSYSGEN is useful when ST has been assigned the logical-device name NL

and you want to inhibit installation of the unnecessary NL.

[NO]TOY

SET NL TOY, the default, runs the NL handler installation code, if the RT–11

system is booted with the NLx.SYS handler present on the system disk or if the

NL handler is removed and installed with DCL commands.

The NL installation code transfers date and time information from the KDJ11–E

Time-Of-Year (TOY) clock to the resident monitor. You might want to include

this command in your STRTxx.COM ﬁle.

SET NL NOTOY prevents the NL handler from transferring the current date

and time to the resident monitor.

Description

The KDJ11–E clock keeps the current date and time; both the PDP–11/93 and 11/94

processors contain this clock.

While the SET NL TOY transfers date and time information from the KDJ11–E

clock to the resident monitor, the SETUP command sets the date and time.

Issue the SETUP [CLOCK] DATE and SETUP [CLOCK] TIME commands to set the

speciﬁed date and time for both the monitor time and the time-of-year clock in a

PDP–11/93 and 11/94 processor.

258 RT–11 Command Descriptions