Operation Manual

Steam cleaning hard floors
Refreshing carpets (dependant on model)
IMPORTANT: Never use the steam mop without the microfibre cleaning pad properly attached to the
floor head.
IMPORTANT: When using on carpets, always ensure the microfibre cleaning pad is properly attached to the
floor head.
WARNING: To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
Plug into mains and wait
for the green light (on the
main body) to switch on
after 1 min.
To recline the unit place
foot on floor head and
tilt handle.
To produce steam
squeeze the trigger.
M
o
ve t
h
e
st
eam
mo
p
slo
wly
back
war
d
s
an
d
fo
rwar
d
s
acr
o
ss t
h
e
flo
o
r
pay
i
n
g
part
i
cular
at
t
en
t
i
o
n
to high traffic areas.
Attach carpet glider
attachment to
floor head.
To recline the unit place
foot on floor head and
tilt handle.
To produce steam
squeeze the trigger.
Move the steam mop slowly
backwards and forwards
across the floor paying
particular attention
to high traffic areas.
WARNING: Never leave the steam mop in one spot on any surface for an extended period of time with
a damp or wet microfibre cleaning pad attached as this may damage the floor surface.
WARNING: Your steam mop should only be used on tiles, lino or sealed wood flooring.
Do not use on laminate flooring.
Operation
6
IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steam mop
on a discrete area of flooring to begin with.