User guide

Using your Window Vac
Getting started Using your machine
Pullthetriggertospray
solution onto the surface
to be cleaned.
ToturntheWindowVacon,
press the power button. You
will hear a click sound.
Wipe the surface with the
microbreorscrubpadon
thebackofthemachine.
Vacuumupwaterusing
slow, straight strokes.
Whilst pulling the trigger to spray solution,
youmayneedtopressthetriggerafew
timesrstbeforesolutionisdispensed,
thisclearsairfromtheWindowVac.
Finish with sideways strokes.
MovetheWindowVacinazig-zag
patterntoavoidover-saturatinga
single point.
After use press the power
button to turn o.