User guide

WARNING
Getting started Using your machine
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Plugchargerintothe
mainsandinsertthe
charger cable into the back
of the Window Vac.
Removefoamlter.
Topupwithwater(max40°C)tomaxlevel.Replacelter
andpushthewatertankcapbackintothemachine.When
ttingthewatertankcapbackintothemachineensure
the tab is facing downwards to prevent leaking.
Theindicatorlightwill
show red while the
machineischarging.
Pourin40mlVaxWindow
Cleaner solution.
Theindicatorlightwill
change to green when
fully charged.
Tollthewatertankliftthe
water tank cap.
Always switch o and unplug the
Window

Vac

from

the
electrical

socket

before

assembling,
opening

or

emptying
the
water

tank,
or

before

connecting/disconnecting

the

attachments
or

performingany

maintenance.
IMPORTANT: This Window Vac is to be used on vertical surfaces only.
NOTE: Fully charge the battery before rst use. Initial charge is 3 hours. Don’t use the Window Vac whilst
connected to the charger unit.