Operation Manual

Replacing the hard water filter
IMPORTANT: The condition of the filter affects the performance of your machine.
Check and change filter (depending on level of use).
Your machine is fitted with a hard water filter. If you live in an area of hard water the filter will
discolour/darken over time (2). Depending on water hardness and/or frequency of use the filter should be
changed every 6 months, or once the filter has completely darkened.
Replacing the washers (dependant on model)
IMPORTANT: Allow the unit to cool down fully before performing maintenance or troubleshooting checks.
Over time, the floor head can become loose. You may need to replace the washers at the end of the body unit
with the replacement washers provided.
1
2
Maintenance (Keep your Vax as good as new)
8
After steamer use/using cooling base/storage (dependant on model)
After using the stick steam cleaner and to avoid damage to your floors, unplug the unit and place stick steam
cleaner on cooling base until product cools. Once cooled, remove steamer pad and follow ‘cleaning the pads’
section. Empty out any remaining water in the tank and clean the external surface with a dry cloth.