User's Guide

Using your machine
Press the twin tank
release button down,
grip the twin tank
and pull to remove.
Fill the detergent tank
up to the ll line with
water and top up with
detergent replace the cap
and push rmly to close.
Grip the twin tank and
pull the tab on the water
tank cap to open.
Before replacing the twin
tank make sure the hard
water lter is in place.
Fill the water tank with
water. Replace the cap
and push rmly to close.
Line up the lip on the base
of twin tank with the main
body. Push in a hinge like
manner to click into place.
Grip the twin tank and pull
the tab on the detergent
tank cap to open.
IMPORTANT: If the twin
tank is not tted correctly
there will be a reduction
in the amount of steam/
detergent produced.
Filling the twin tank
IMPORTANT: Always test on an inconspicuous area of ooring rst before using detergent. Don’t over ll the clean twin tanks
or exceed the maximum amount required. Don’t use the steamer without water in the water tank. Always top up with water
in good time.
CAUTION: This steamer is not free standing, when lling or carrying out any maintenance always stand securely against a wall/
xed structure or lie the steamer at on the oor in a suitable location so it does not become a trip hazard or can be stepped on.