User's Guide
Taking care of your machine
Cleaning the Compact Scrub Brush
Replacing the Hard Water Filter
Press the reach wand
release pedal and pull
the reach wand
and handheld out
of the oorhead.
Remove any dirt /debris
from the brushes and
wash under running water
(max 40⁰C) Leave to dry
before re-tting the
compact scrub brush
onto the steamer.
Pull to remove the
compact scrub brush
from the oorhead.
Press the twin tank
release button grip
the twin tank and pull
to remove tanks.
Use your thumb and index
nger to grip the hard
water lter. Pull the hard
water lter towards
you to remove.
The hard water lter
should be replaced
every 3 to 6 months.
CAUTION: Switch o the steamer and unplug from the mains. Allow the steamer to fully cool down before performing
any maintenance or troubleshooting checks.
IMPORTANT: Don’t operate the steamer without hard water lter in place. The condition of the lter aects the performance
of your steamer, check and change lter periodically. Depending on water hardness and frequency of use, the lter should
be changed every 3 to 6 months.