User's Guide
Using your machine
To produce steam squeeze the trigger in short bursts.
Don’t hold the trigger continuously to prevent over wetting.
CAUTION: Always switch o the steamer and allow steamer to cool before attaching/detaching the reach wand, oorhead,
accessories and twin tank.
Always stand steamer securely against a wall/xed structure or lie the steamer at on the oor in a suitable location so it does
not become a trip hazard or can be stepped on.
When using the steam do not aim towards electrical components such as light ttings, sockets and wiring.
IMPORTANT: Always check the accessories are clean and free from debris, don’t use if damaged, broken or worn.
Using the Steam Fresh Power Plus reach wand
Press the reach wand
release pedal and pull
the reach wand and
handheld out of
the oorhead.
With the adaptor and
cleaning tool attached
to the 360 connector,
slide it onto the reach
wand nozzle.
Press the centre pad
on the control panel
to select preferred
setting steam/detergent.
Twist the adaptor
clockwise and listen
for the locking click.
Plug the steamer into
mains and slide the
On/O switch to on.
The green light will
illuminate when it is ready
to use. The steamer will
automatically set to max
steam (no detergent).
TIP
To improve your
comfort, use the
additional handgrip
on the handheld
to support the unit
and help you clean
dicult to reach areas.