User's Guide

Using your machine
IMPORTANT: Never use the steam mop without a microbre cleaning pad attached to the oorhead.
Never leave the steam mop in one spot for an extended period of time or with a damp or wet microbre pad attached
as this may damage the oor surface.
CAUTION: This steamer is not free standing, always stand using the wall bracket or securely against a wall/xed structure
alternatively, lie the steamer at on the oor in a suitable location so it does not become a trip hazard or can be stepped on.
When the steamer
is switched on the
control panel will
automatically set
to max steam
(no detergent).
Place the microbre
pad on the oor white
side facing up. Place the
oorhead onto microbre
pad making sure the
microbre pad covers
the entire oorhead.
Press the button in the
centre of the control
panel to select steam
and detergent setting.
The light will illuminate
at the desired setting:
Plug the steamer into
mains power supply and
slide the On/O switch
to “On”.
Pull handle
backwards to recline.
The orange light will
illuminate to indicate
power on.
To produce steam
squeeze the trigger
in short bursts.
Don’t hold the trigger
continuously to prevent
over wetting oors.
The green light will
illuminate to indicate
the steamer is ready
to use. The steamer
will automatically set to
Max steam (no detergent).
Move the steamer slowly
forwards and backwards
across the oor paying
particular attention
to high trac areas.
Squeeze/release trigger
to release steam
as required.
Using the oor steamer
TIP
.. High Steam
. Low Steam
.. High Steam and Detergent
. Low Steam and Detergent
STEAM FUNCTIONS