Duet Master - S7 Series Let’s get started S7 Series vax.co.
Let’s talk safety Basic safety precautions Don’ts Do’s This steamer is intended for household use only and NOT for commercial or industrial use. • Only use the steamer indoors and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing away from moving parts and openings whilst using the steamer.
Let’s talk safety Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • Please refer to floor manufacturer’s care recommendations before use, and test your flooring/carpet/rugs by running the steamer over a small hidden area, if no pile distortion or no damage occurs continue cleaning. Not suitable for use on wax polished floors or furniture, acrylic surfaces and synthetic, velvet or steam/water sensitive materials.
Thank you for buying this Duet Master S7 Series. Taking care of your floors The Duet Master is designed to make steaming floors, upholstery and surfaces regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your home with the Duet Master will ensure it stays hygienically clean. Maintaining your floors will ensure they keep their appearance for longer.
Contents Duet Master - S7 Series Included with your machine Let’s talk safety Getting to know your machine Detailer tool Hose Getting started Window squeegee /Upholstery tool Concentration nozzle Using your machine Taking care of your machine Accessories connector Grout brush Small plastic brush Let’s talk technical Large plastic brush What to do if it goes wrong Metal brush Getting in touch Scraper tool Shoulder strap Accessories Window cloth S7-A model also includes Microfibre cleaning pad
Getting to know your machine Handle Steam release trigger Upper cord clip Lower cord clip Handle release button Clean water tank Hard water filter (hidden) On/Off button LED indicator Floor head release button Floor head Accessories & Consumables* Technical Specification Product Model code Duet Master Duet Master Duet Master Total Home Total Home Total Home Master Master Pro S7 S7-A S7-A+ Wattage 1600w 1600w 1600w Voltage 220-240v 220-240v 220-240v Water tank capacity 0.4l 0.4l 0.
e 6) Getting started CAUTION: The steamer head gets very hot during use. Always switch off the steamer before emptying the water tank or changing the cleaning pads/accessories. IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steamer on an hidden area of flooring/surface to begin with. Before you begin cleaning • Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
Using your machine Filling water tank Press the water tank release button and pull tank to remove. Pull the tab on water tank cap to open. Fill water tank with max 400ml of water. Replace cap and push firmly to close. To replace water tank, line up base of water tank into ridge of steamer. Push to click into place. IMPORTANT: Never use the steamer without a cleaning pad attached to the floor head.
Using your machine IMPORTANT: When using on carpets, always make sure the microfibre cleaning pad covers the floor head entirely before using the carpet glider. Only use the carpet glider when refreshing carpets Refreshing carpets Place the microfibre pad on the floor white side facing up. Place steamer onto pad making sure the entire pad covers the floor head. With microfibre pad attached, place steamer into the carpet glider. The carpet glider should only be used when refreshing carpets.
Using your machine Using the Nano head (S7-A+ Only) Quick and easy release to remove stubborn stains for better cleaning results. Hard tough bristles to agitate stubborn stains. Hold side floor head down with your foot and lift steamer to release Nano head. Place your foot onto the Nano head and pull handle backwards to recline.
Using your machine CAUTION: Always allow tools and accessories to cool down before removing. Attaching the accessory hose Push the accessory connector onto the steamer nozzle until it clicks into place. Line up hose with the accessory connector, twist and push to lock into place. Line up accessory with concentration nozzle, twist and push to lock into place. Press the on/off button to switch on. Line up concentration nozzle with the hose, twist and push to lock into place. Choose an accessory.
Using your machine IMPORTANT: Accessories can only be attached with the concentration nozzle. Taps should be turned off when steaming around them. Don’t steam clean ovens, oven surfaces or grills when hot. Allow to cool to room temperature. Using the tools Concentration nozzle Use to remove soap scum in baths and shower enclosures and to clean stubborn stains in kitchens. Brushes Ideal for any surface from tiles, sinks, toilets and oven tops. Grout brush Lifts embedded dirt from in between tiles.
Taking care of your machine IMPORTANT: Don’t leave water in the tank between uses, this can effect the steamers performance, the water tank should to be emptied and rinsed after each use. Emptying the water tank Press the water tank release button and pull tank to remove. Pull the tab on water tank cap to open. Empty any excess water over the sink. Press the button on the neck of the machine to remove the floor head. Using the de-scaling pin, insert the full length of the pin into the nozzle.
Taking care of your machine IMPORTANT: Don’t operate the steamer without hard water filter in place. The condition of the filter affects the performance of your steamer, check and change filter periodically. If you live in a hard water area the filter will discolour or darken over time. Depending on water hardness and frequency of use, the filter should be changed every 3 to 6 months (or if the filter has discoloured). Changing the hard water filter Remove water tank to access the hard water filter.
Notes
What to do if it goes wrong Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your machine. There is an accessory missing. The steamer has no power. Why is the steamer not producing steam? • Check the On/Off button has been pressed to on. The blue light should illuminate when on. • The plug may not be fully pushed into the electrical socket. • Check the fuse in the plug if this needs replacing, always replace with a British 13amp fuse.
Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the steamer before calling.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Steam Cleaning Pads (Type 2) 1-1-133071-00 3 microfibre cleaning pads (type 2). Drawstring attachment ideal for everyday cleaning. Machine washable for continuous use. Coral Cleaning Pads (Type 3) 1-1-131643-00 These microfibre coral pads are super absorbent and are ideal for removing stubborn stains. The pads attach to the steam cleaner using a drawstring, to secure the pad in place over the steamer floorhead.
Accessories Microfibre Pet Pads (Type 9) 1-1-133265-00 Microfibre pet pads (Type 9) with one touch fit system. Ideal for picking up pet hairs. Machine washable for continuous use. Steam Mop Cleaning Pads 1-1-131864-00 A pack of triangular steam cleaning pads for your Vax Steamer’s triangular floorhead. Pack contains: 2x Microfibre Cleaning Pads, 2x Coral Pads. Total Home Pads 1-1-132528-00 Avoid cross contamination between different areas of your home with this Total Home cleaning kit.
@VaxUK Vax Ltd., 5th Floor 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6BN, UK email: info@vax.co.uk website: vax.co.uk Version 1.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the S7 Series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.
