Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 OQH, UK email: info@vax.co.uk - website: vax.co.uk Version 1.
Total Home Pro Multi-function steam cleaner User Guide S7-A+ vax.co.uk Performance is everything.
Machine Overview 1 2 3 4 5 6 Handle Upper cord clip Power cord Lower cord clip Clean water tank LED indicator a) Water heating/power on (blue LED) b) Steam ready (blue LED) + (green LED) 7 Floor head 8 Steam release trigger Unit 1 8 2 3 4 5 6 7 9 Velcro microfibre cleaning pads x 2 (dependant on model) 10 Carpet glider 11 Cooling base 12 Pro Clean Pad 13 Window squeegee/Upholstery tool 14 Hose 15 Concentration nozzle 16 Accessories storage bag 17 Window cloth 18 Grout brush 19 Scraper tool 20 Detail
General Safety Information This steam mop is intended for household use only and NOT for commercial or industrial use. IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steam mop on a discrete area of flooring to begin with. When using the steam mop, basic safety precautions should always be observed, including the following: WARNING: The stick steam mop head gets very hot during operation. WARNING: Danger of scalding 1.
Operation Assembling your stick steam mop WARNING: To reduce the risk of personal injury, unplug the steam mop when assembling. Insert handle into main body. Line up the metal locking pin with the hole and click into place. 4 Fit the body of the unit into the steam mop floor head. Line up the white plastic locking pin with the hole and click into place. Attach the velcro microfibre cleaning pad to steam mop floor head. The blue face of the cleaning pad should be in contact with the floor.
Operation Before you begin cleaning IMPORTANT: Do not use hot or boiling water to fill clean water tank. Do not overfill the water tank. NOTE: Always ensure there is water in the clean water tank. Remove clean water tank by pressing the quick release button. a Remove the water cap and pour in 400ml of clean water. Replace the water cap. b a b Replace the clean water tank, clicking in place making sure the hard water filter is place.
Operation Steam cleaning hard floors IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steam mop on a discrete area of flooring to begin with. WARNING: Never leave the stick steam mop in one spot on any surface for an extended period of time with a damp or wet microfibre cleaning pad attached as this may damage the floor surface. Your stick steam mop should only be used on tiles, lino, sealed wood flooring including sealed laminate.
Operation Using the handheld steam mop WARNING: To reduce the risk of personal injury, unplug the steam mop when assembling the accessories. WARNING: Always ensure there is water in the clean water tank. Remove handle from main body by pushing metal locking pin and pulling away handle. Remove steam mop floor head from main body by pushing white plastic locking pin and pulling away. When using handheld steam mop attach the accessory connector 1 and then attach the desired accessory 2.
Maintenance (Keep your Vax as good as new) Empty the water tank IMPORTANT: Allow the unit to fully cool down before performing any maintenance or troubleshooting checks. Remove the clean water tank by pressing the quick release button. Remove the water cap. Empty any excess water over the sink, replace water cap and return to the unit. Removing the cleaning pad IMPORTANT: Allow the unit to fully cool down before performing any maintenance or troubleshooting checks.
Maintenance (Keep your Vax as good as new) Replacing the hard water filter IMPORTANT: The condition of the filter affects the performance of your machine. Check and change filter (depending on level of use). Do not operate unit without hard water filter in place. Your machine is fitted with a hard water filter. If you live in an area of hard water the filter will discolour/darken over time (2).
FAQs WARNING: To reduce the risk of personal injury, unplug the stick steam mop before performing maintenance or trouble shooting checks. Is there an accessory missing? Why is the steam mop not producing steam? • Check the Parts Overview page in the guide to make sure the part is definitely included in your unit. • There may be no water in the tank; please refer to the operation section. • If the part is missing we’re here to help.
Other Information UK Service & Help Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Monday-Friday 8.30am to 6.30pm Saturday 9.00am to 5.00pm Any queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the steam mop before calling. For the nearest Service Agent, please call the Vax Careline or visit vax.co.uk Consumables To purchase spares and accessories, please visit vax.co.
